Step 01
Profile Cutting
Aluminium profiles are prepared and cut according to the production dimensions required for the specific construction.
Inside Our Production Facility · EMF60 Hybrid
Motorized Minimal Sliding System: Setup, Testing & Final Control
A look inside the Mparolas production process — from aluminium profile preparation and CNC machining to full-size assembly, motor setup, operational testing and final preparation for export.
Factory Process
Precision before the system reaches the project.
Motorized minimal sliding systems combine large glazed surfaces, slim aluminium profiles, mechanical components and an electric drive system in one complete assembly. For this reason, the fabrication process does not end when the frame is assembled.
At our production facility, the complete construction is assembled and checked before dispatch. The motorized movement is set up and tested on the finished system so that the operation of the sliding elements can be evaluated as a complete unit.
25 mm
Minimal central interlock
Full-size
Factory assembly & operational checks
Brussels
Final destination of this export project
01 · Fabrication
From aluminium profile to finished components.
The process begins with profile preparation, identification and precision machining. Each stage contributes to the dimensional accuracy required for large minimal sliding constructions.
Step 02
Identification & Control
Profiles and components are identified and checked before moving to the next stage of machining and assembly.
Step 03
CNC Machining
Precision machining prepares the aluminium components for hardware, connections and the final assembly sequence.
02 · Assembly
Building the complete minimal sliding unit.
Once machining is complete, the system is assembled in the factory so the relationship between frame, sliding panels, glazing and motorized movement can be checked before dispatch.
ASSEMBLY / 01
Frame setup
The frame is assembled and positioned inside the production area, creating the full-size configuration required for the following installation and testing stages.
ASSEMBLY / 02
Controlled glass handling
Large glazed panels require controlled handling during assembly. Specialized lifting equipment supports safe positioning and accurate placement of the glazing into the sliding elements.
ASSEMBLY / 03
Complete system configuration
With the glazed sliding elements installed, the construction can be evaluated as a complete system before the motorized operating tests begin.
03 · Motor Setup & Testing
Testing the motorized movement before dispatch.
The motorized EMF60 assembly is operated at full scale inside the factory. Instead of checking individual components in isolation, the complete glazed sliding construction is tested as one finished system before final preparation and packaging.
Factory Test · 01
Full-size operational testing
Once the sliding panels, glazing and motorized drive are integrated, the complete construction is operated repeatedly inside the production facility. This allows our team to observe the opening and closing movement of the finished system, verify smooth travel and complete the final setup under controlled factory conditions.
Motorized EMF60 · Factory Test
Setup & Movement Detail
Factory Test · 02
Fine adjustment and movement control
The closer vertical view shows the motorized system during its final adjustment stage. The movement of the large sliding element is observed through repeated cycles, allowing the operating behaviour of the completed construction to be checked before it leaves the factory.
01
Complete glazed system assembled before testing
02
Motorized opening and closing tested through repeated cycles
03
Final inspection before packing and international transport
04 · Final Preparation & Export
From our production facility to Brussels.
After assembly, motor setup and operational testing, the completed aluminium systems were prepared for loading and international transport. This project continued from our production facility in Greece to its destination in Brussels, Belgium.
View the Brussels export project →EUROPA Minimal Frame
EMF60 Hybrid Minimal Sliding System
A thermally insulated minimal sliding aluminium system designed for expansive glazing and ultra-slim architectural lines. The 25 mm central interlock reduces the visible aluminium between adjacent sliding panels while maintaining the engineering requirements of large-format glazing.
Architectural Aluminium · International Projects
Planning a project with large motorized minimal openings?
Send us your architectural drawings, dimensions and project requirements. Our team can review the appropriate system configuration, glazing requirements and fabrication approach for your project.